So I just want to send some valid data to imx6 to verify the imx6 has receiving some data.
So i have configured adv7182 for free run mode to generate the patterns using the below configuration,
0xf, 0x0
0x00,0x05,
0x0c,0x37,
0x14,0x11, //
0x02,0x54, //ntsc
0x00,0x0e,
0x3,0xC,
0x4,0x7,
0x13,0x00,
0x17,0x41,
0x1D,0x40,
0xf4,0x7f, //drive strength test
0x52,0xCB,
Now in the Oscilloscope i am able to see some fixed patterns means same data again and again . so i thing that patterns are generated by adv7182.
The status register is ,
0x10 is 0xe
0x12 is 0x10
0x13 is 0x19