EVAL-ADV7612 - 7511P monochrome input

Hello all,

We use EVAL-ADV7612-7511P at EAV3 tool.

Attached image is output image from evaluation board.

Condition  is below

Input signal:DVI-D　1920×1080P　 59.94Hz

Output from evaluation board:DVI-D　 1920×1080P

Registers which we change from AVE3 are belwo

72　0xAF　16　->　72　 0xAF　14

98　0x02　F5　 ->　98　 0x02　F7

Output image is not monochrome image when input is monochrome.

Please let me know if we need to set registers except above.

Regards,