Re: rom code for bf504f rev. 0.1
I will post here when I have anything further to share - for now, I am still waiting to hear about the availability of the sources for the updated ROM. Craig.
View ArticleInterface Ic / device for converting 24/12V to 12V/5V
Hi, Can anyone suggest me an ic/board which can convert a 24V/12V signal to a 12V/5V signal . The signals frequency can reach upto 1Mhz. Same operation as relay has to be done. @
View ArticleRe: SDP-B dual programming?
Hi, I have moved this question to the System Demonstration Platform (SDP) Support community. Please continue the discussion here. Regards,Craig.
View ArticleRe: Best Blackfin uClinux development environment for Windows 7
Hi Dave, In fact we would always recommend customer to do Linux development in Linux environment, as a trade off they may install Linux host on a virtual machine in windows. And I don't think so far we...
View ArticleRe: ADSP-BF537 EZ-KIT Lite with ICE-100B and bfin-gdbproxy connection fails
I'm using toolchain win32 2010R1. I tried to figure out which firmware is on the ICE-100B with urJTAG, but is not possible to connect to the ICE-100B with urJTAG either. Thank you very much.
View ArticleRe: Booting an ADSP-21479 in spi slave mode
Hi CraigG, thank you for the reply. I got it running right now. The problem was, that i thought the loader utility would already pack the data in LSB format because it also already does the right...
View ArticleADV7611- Unused Pins
Hello, In my design i am receiving only RXAC+&-, RXA0+&-, RXA1+&- and RXA2+&- signals as input.what i do the unused pins of CEC, DDCA_SCL, DDCA_SDA, RXA_5V, HPA_A/INT2 and DE. I am not...
View ArticleADAU1442 ASRC Implementation
Hello Everybody! My design involves an ASRC in which the Sigma DSP accepts S/PDIF input signals at different sampling rates and output as a S/PDIF signal as well. Say for example, incoming signals at...
View ArticleClik here to view.
Re: ADV7612 / ADV7511 repeater SPDIF
HI Dani,1) RetVal = ADIAPI_RepTxSetAudioInputInterface(AUD_IF_AUTO, REP_AUD_TYPE_AUTO);This is used to configure the audio interface input and the packet type output of the TX device. If the audio is...
View ArticleADV7625 EDID problem
Hi All, Test Tool: 1.ADV7625 Demo Board 2.SONY TV which support CEC control and AP585 or QD882(any device which can read out the EDID) 3.SONY BD Player which support CEC control Test...
View ArticleRe: Crashing CCES after setting user heap
MikeSmithCanada wrote: I then run -- I get a complete hang with the simulator -- is this to be expected No, a crash isn't expected. I also wasn't able to reproduce the behaviour. If you are able to...
View ArticleRe: USB-LAN EZ-EXTENDER is not detecting
Hi jaganathang, Have you set the switch and jumper settings on your BF533 EZ-KIT and USB-LAN EZ-EXTENDER according to the 'readme.txt' file provided with the loopback example? Please check the switch...
View ArticleRe: ADV7625 EDID problem
Hi Yeguiyou, We will look in to this. Best Regards,Jeyasudha.M
View ArticleRe: Crashing CCES after setting user heap
MikeSmithCanada wrote: BUG report -- If you use the LDF configurator and you add a new heap -- the configurator does not automatically increment the ID numberDo you mean that when you click "Add" to...
View ArticleRe: Crashing CCES after setting user heap
MikeSmithCanada wrote: Still working along the same lines of putting some data in a specific memory location ... which means that bank("bank_internal") and bank("bank_external") are either both in or...
View ArticleRe: Crashing CCES after setting user heap
MikeSmithCanada wrote: SO have worked out thatint *thing = new (1) int is allowed butint *thing = new (heapName) is notHi, That is correct. I believe there's an existing enhancement in our bug tracking...
View ArticleAD8264 with ADC
Good day!I am going to use AD8264 with ADC ADS5482. For a full-scale differential input of ADS5482, each of the differential lines of the input signal swings symmetrically between (3.1 V + 0.75 V) and...
View ArticleRe: Problems porting BF518 POST to CCES
Hi Matt, The interrupt() functions that were used in VisualDSP++ to install interrupt handlers is not available in CCES. Instead we provide the Interrupt Service from the System Services library, which...
View ArticleClik here to view.
Re: Problems Using VBSCRIPT to command the BTC automation interface
Hi Graham, I was using this functionality over VBScript just last week and didn't notice any issues. Could you provide some additional information, like what processor you're targeting, whether...
View ArticleClik here to view.
Re: About ADXL362 Real ODR
Hi Rurality, The issue should be caused by the ADXL362 internal clock deviation. Suppose the ideal built in clock is 51.2kHz but it is different part by part. You can find the deviation from figure 29,...
View Article
